SCAMP sailboat, hull 691, completed July 2024. This is my third boat build — construction used CNC-cut marine plywood from Duckworks, Raka epoxy, and was built to spec from John Welford’s instructions with no modifications.
The keel, rudder and lower hull have graphite-loaded epoxy for abrasion protection, the bottom and lowest garboard are fiberglassed also with two coats of epoxy with graphite, and the mast is from single-piece, knot-free Sitka spruce birdsmouth build with 5 coats of TotalBoat varnish.
The boat comes fully rigged with a Neil Pryde sail in tanbark, Dyneema lazy jacks and reefing lines spliced by me, a Ronstan tiller extension, and tiller clutch.
The standout feature is an ePropulsion Evo 3HP electric outboard with very few cycles, including a permanently installed interior remote control for speed and direction — motor for 3 hours at 4 knots at 75% power. EVA teak-look floor and seats, cherry gunwales, non-skid deck surfaces, and extra paint included for touch-ups. This boat is ready to sail and built to last. Includes a 2024 CE Smith trailer, customized to fit the SCAMP.
At request I can send a PDF file with information regarding the construction process and more detailed description.
Asking price 16000USD. open to serious offer, located in Northern California, can drive to the east coast or PNW.
